Concrete Tank
  1. Home
  2. Farms

Farms

Concrete Water Tanks for Farms & Agricultural Projects

Farms need a large reserve that survives sun and cold for years. A concrete tank is the solution that will not let you down.

Why concrete for farms?

  • Handles direct sun and extreme heat without cracking or deforming.
  • Large capacities up to 29 m³ per tank.
  • Connects easily to wells, water trucks or pumps.
  • Low maintenance and a long service life.

For large villas and palaces

Water use at large villas and palaces spikes on holidays and gatherings. A 24 or 28 m³ tank gives you peace of mind without constant water-truck orders.

We deliver to farming regions

We deliver to Al Kharj, Qassim, Hail, Al Jouf, Al Ahsa and every agricultural area. See delivery cities.

Recommended sizes

28m³
Buildings & farms

28 m³ Concrete Tank

Suits apartment buildings, large villas, farms and shops

  • Length4.35 m
  • Width3.35 m
  • Height2.90 m

Free quote including delivery to your city

A Practical Guide to Concrete Water Tanks for Farms and Projects

How a farm tank differs from a home tank

You size a home tank by counting people. A farm tank doesn't work that way. Demand follows irrigation shifts, crops, livestock and the season, and the source is usually a well and a pump rather than a city main. Knowing what job the tank has to do will save you from buying the wrong size and re-plumbing later.

On a farm or agricultural project, a tank does one or more of three jobs

  • Buffer between well and irrigation. A well delivers water at a limited rate, while the network often draws more than that while it runs. The tank fills slowly and hands over the full volume when you need it.
  • Reserve for breakdowns. If the pump fails, the power drops or a water truck runs late, the farm keeps running on stored water until the problem is fixed.
  • Separation of uses. Water for staff housing and the majlis sits in its own tank, away from irrigation water.

The same goes for projects working away from the city network, such as poultry operations, greenhouses, nurseries, staff housing and contractors' sites. All of them need a steady supply somewhere the mains doesn't reach, and all of them stall if the water suddenly runs out.

Decide which job comes first before you look at the tank sizes. A buffer needs enough volume for one full irrigation cycle. A reserve is measured in days. Separation usually means two tanks rather than one big one. For the wider picture, read our farm water storage guide.

Working out what your farm actually uses

The per-person rule in our size calculator works for farm housing and nothing else. Irrigation has no single number, because crop, soil, season and method all change it. The reliable approach is to measure your own network. The figures below are examples only, so swap in your own.

  1. Measure the flow. Fill a barrel of known size from the line and time it. If a 200 litre barrel fills in two minutes, you have 100 litres a minute, or 6,000 litres an hour.
  2. Multiply by running hours. Three hours of irrigation a day at that flow is 18,000 litres, which is 18 m³.
  3. Add housing and everything else. Six workers at 250 litres each is 1,500 litres a day. Add livestock and wash-down water from what you really use.
  4. Use a summer day. The tank has to carry your heaviest day, not the yearly average.
  5. Multiply by your safety margin. How many days could you cope with no source? With a strong well and rare outages, one day may do. If you rely on trucks, use the gap between deliveries.

Our example comes to 19.5 m³ a day. For one day of cover, a 22 m³ tank does it with a small margin. For two days you need 39 m³, and a 28 m³ plus a 14 m³ gives you 42 m³. Our size guide goes further into choosing capacity.

Three mistakes come up again and again

  • Sizing to the well rather than the network. The well tells you how fast you can fill. The network tells you how much you need. You have to know both.
  • Forgetting refill time. If the well takes a long time to fill the tank, the next cycle has to wait. Check that the tank can refill between runs.
  • Only counting today's planted area. If you plan to plant another plot next year, allow for it now, even if that only means leaving space for a second tank.

Farm tank sizes compared

This table shows how long each tank lasts at three levels of daily use. Those levels are just reference points, so scale them to your own figure.

TankLitresBase area m²At 5 m³/dayAt 10 m³/dayAt 20 m³/day
14 m³14,0008.22.8 days1.4 days0.7 days
22 m³ long22,000104.4 days2.2 days1.1 days
22 m³ square22,00010.94.4 days2.2 days1.1 days
24 m³24,00012.84.8 days2.4 days1.2 days
28 m³28,00014.65.6 days2.8 days1.4 days
29 m³ long29,00012.55.8 days2.9 days1.5 days
29 m³ wide29,00012.85.8 days2.9 days1.5 days

Two things are worth noticing. The 24 m³ and the 29 m³ wide share exactly the same base, 4.40 × 2.90 m. They differ only in height, 2.90 m against 3.30 m, so if your ground allows the depth you gain 5 m³ on the same patch of land.

The 29 m³ long is only 2.50 m wide, the narrowest of the larger sizes, which helps when the only free space is a strip between palm rows or along a boundary wall. The 14 m³ tends to suit staff housing, a small nursery, or a second tank that keeps domestic water apart from irrigation.

On rocky land where deep digging is hard, check height before capacity. The 28 m³ stands 2.90 m high, while both 29 m³ tanks stand 3.30 m. You give up one cubic metre and dig 40 cm less, which can make a real difference to the excavation.

Connecting to the well, pump and irrigation network

Every tank has inlet and outlet openings. Water comes in from the well, a truck or the mains, and goes out to whichever pump feeds your irrigation or housing. A typical farm layout runs like this

  1. The well pump lifts water into the tank.
  2. A float valve or level sensor stops the fill when the tank is full, so it doesn't overflow and the pump isn't left running for nothing.
  3. The irrigation pump draws from the outlet and pushes water into the network.
  4. A filter sits ahead of any drip lines, because well water can carry sand and debris that clog emitters.

Have a fallback in case the well stops. A second fill point near the track lets a water truck fill the tank directly without touching the well's pipework, which makes life a lot easier during a breakdown.

Be realistic about pressure. A tank on a raised base gives you a little head, enough for nearby watering or topping up a trough. Drip lines and sprinklers still need a pump. Plan a shaded spot for that pump close to the tank, somewhere you can reach easily when it needs servicing.

Our tank pump guide and plumbing connections guide cover the details. If trucks fill your tank for part of the year, the truck filling guide will help you put the fill point where a driver can get to it.

Underground or above ground on a farm

Our tanks work underground or above ground on a base, and farms usually have more freedom than homes because there is room to spare. Let the way you operate settle it

Your situationUsually the better fit
The spot is on a route for machinery or trucksUnderground, so the surface stays clear
You want to see and check the tank easilyAbove ground on a base
Rocky ground that is hard to digAbove ground on a base
Groundwater close to the surfaceAbove ground, or look hard at the excavation first
You want the water away from direct summer sunUnderground

In Al Ahsa and other places with shallow groundwater, read the high groundwater guide before anyone starts digging. There is a full comparison in underground vs above-ground tanks, and more on the underground tanks page.

Where the tank sits on the farm deserves as much thought as its size. Keep it close to the well and the start of the irrigation network so pipe runs stay short. Pick slightly higher ground, away from flood channels and from irrigation water that could soak the soil around it. And leave room to walk around it and reach the pump and valves without crossing the crops.

If heavy machinery or trucks will cross the spot above an underground tank, tell us at the start so we can go through it with you before quoting. Don't assume the ground above it will take the load without asking.

Either way the protection is the same a water-safe chemical lining inside and bitumen outside, with a 10-year warranty on manufacturing and installation that covers cracks and leaks.

Multiple tanks for agricultural projects

Our largest single tank is 29 m³. Beyond that, several tanks can be installed and connected, and on a farm this brings benefits beyond the extra volume.

  • One line per use. Irrigation, housing, and livestock or greenhouses can each have their own tank.
  • The farm keeps running. When you empty one tank for cleaning or a check, the other carries on.
  • Growth in stages. Start with one tank and add another as the planted area grows. Just leave the space and a spare connection now.
  • Storage near the demand. A large farm can have a tank per sector rather than drawing everything from one point.

A quick comparison three 29 m³ wide tanks hold 87 m³ on 38.3 m² of ground, not counting the gaps between them. Three 28 m³ tanks hold 84 m³ on 43.7 m². So the 29 m³ wide gives you more water on less land, but it needs the extra height.

Projects and contractors ordering several tanks get a special quote. Our precast tanks page explains why installation is faster than casting on site, which matters when a project is tied to a planting season.

Getting the truck and crane onto your land

The tank arrives whole on a truck and a crane lowers it into place. That means no casting work on your land, but it does mean there has to be a way in. This is where farms tend to run into trouble, because internal tracks are usually unpaved.

Before ordering, walk from the paved road to the tank location and photograph

  • The gate, how wide it is, and anything overhead such as an arch or a cable.
  • Soft sand and any stretch where cars sink or irrigation has left the ground wet.
  • Power lines over the track and over the tank spot.
  • Palm fronds and trees in the way of the crane arm.
  • Buried irrigation pipes under the truck's route.
  • Where the crane can stand, and how close that is to the tank spot.

One practical tip stop watering along the truck route early enough for the ground to dry and firm up before installation day. See the crane access guide and site preparation guide before you dig a pit or pour a base. Once the site is ready, installation usually takes one day.

Serving farms across the Kingdom

We supply farms and projects in every region of Saudi Arabia, and each has its own conditions.

  • Al Kharj is close to our factory, with plenty of farms and agricultural projects.
  • Qassim is date palm country, and most requests there are for larger sizes.
  • Hail is a farming region with cold winters, so the tank has to cope with big swings in weather.
  • Al Jouf is known for its olive farms, and the distance makes it worth asking about several tanks in one order.
  • Al Ahsa is a palm oasis where groundwater sits close to the surface in many spots, so excavation needs care.
  • Tabuk has large farms and hard winters.
  • Najran farms often depend on wells and water trucks.
  • Madinah has palm farms around the city that need a few days of reserve.
  • Taif has highland farms, where the crane route on mountain roads should be checked in photos first.

Delivery and installation are free inside Riyadh. Other cities have a fee based on size and distance. If you don't see your area on the delivery areas page, just send us your location.

Looking after a farm tank

Well water brings sand and sediment with it, and over time that settles on the tank floor. No single schedule suits every farm. Watch your filter if it starts clogging faster than usual, the tank is due a look. Use a quiet spell in the irrigation calendar to drain and clean it.

Keep the hatch tightly closed against dust, insects and birds, which matters more on a farm than at home. The cleaning guide covers the method, and leak detection covers what to watch for.

Still comparing materials? See concrete vs fiberglass and concrete vs plastic. The differences count for more on a farm, where a tank is often exposed to the sun and working around machinery all the time.

Requesting a quote for a farm or project

Quotes are free and in writing. The clearer your details, the more accurate our reply. Send us on WhatsApp

  1. The farm's map location.
  2. Photos of the tank spot, the internal track and the gate.
  3. Your water source well, truck or both.
  4. Your daily need if you have worked it out, and how many tanks you have in mind.
  5. Whether you want it underground or above ground on a base.

We reply with a quote and a date. VAT is shown separately and you get an official tax invoice, which helps when the farm sits under a company or establishment. The buying checklist is worth a read before you decide, and why choose us explains how we work.

FAQ

Can one tank serve both housing and irrigation?
On a small farm it can work, but keeping them apart is better. Housing water stays in its own tank and doesn't run out when irrigation draws everything down. A 14 m³ tank usually covers small staff housing.
Is one 29 m³ tank better than two 14 m³ tanks?
Two 14 m³ tanks hold 28 m³ and let you empty one while the other keeps working, but they need 16.3 m² of base against 12.8 m² for the 29 m³ wide. Choose two if you have two different uses. Choose the large tank if you simply want volume in one place.
Does a tank replace an irrigation pump?
Generally no. The tank stores water and the pump supplies the pressure drip lines and sprinklers need. Nearby watering or filling a trough may work by gravity from a tank on a raised base.
My well water is salty. Will the tank fix that?
No. A tank stores water and doesn't change its salinity. Tell us about your water source when you order, and keep it in a separate tank from housing water if the uses differ.
Can I add another tank in a year or two?
Yes, tanks can be installed and connected to each other. Leave enough space and a route the crane can use, because planting around the spot can close that route off later.
My farm is a long way from the paved road. Can you reach it?
Send your location and photos of the internal track and we will look at truck and crane access. The fee depends on size and distance and is stated clearly in your quote.
I have a project on several sites. Can I get one quote?
Yes, projects and multi-tank orders get a special quote. Send the location of each site and the number of tanks and we will put it together.
Can I connect the tank to a well and pump?
Yes. The tank has inlet and outlet openings that connect to a well, pump or water truck depending on your plumbing.
What does the warranty cover?
A 10-year warranty on manufacturing and installation, covering cracks and leaks.
How long does installation take?
The tank arrives ready-made from the factory; crane installation usually takes one day once the site is prepared. We agree the delivery date when you order.

Ready to order your tank?

Message us on WhatsApp for a final delivered price to your city and an installation date.