Concrete Tank
  1. Home
  2. Articles
  3. Precast or Cast-in-Place Concrete Tank? What Differs and When to Choose Each

Article

Precast or Cast-in-Place Concrete Tank? What Differs and When to Choose Each

Both are reinforced concrete. What differs is where the casting happens and who controls each step, and that reaches your plot as time, disruption and clear responsibility. Here is how to decide.

Updated · Concrete Tank team

Precast concrete water tank being placed by crane

Once you settle on a concrete water tank, a second question follows. Do you order a finished tank from a factory, or have a contractor build one on your plot? Some people talk as though only one of these is real concrete. That is not so. Both are reinforced concrete. They differ in how they get there, and that affects time, quality control and who answers for it if something goes wrong.

We make precast tanks, so we have a side in this. There are still projects where casting on site is the right call, and we will say which ones.

What the two terms mean

Precast means the tank is cast and cured in a factory, then transported finished to your site. Ours are made in our factory in Al Suwaidi, Riyadh, under engineering supervision, then arrive by truck and are placed by crane. They come with a water-safe chemical lining inside and bitumen outside.

Cast-in-place, also called cast in situ, means the tank is built on your plot in stages. A contractor excavates, builds formwork, ties the steel, pours the floor, then the walls, then the roof. The concrete is left to cure, the formwork comes off, and the tank is waterproofed and tested. It is built the same way as any other concrete element of your house.

Who does what, and where

Lay the stages next to each other and the difference becomes obvious.

StagePrecastCast-in-place
Excavation or site preparationYour siteYour site
Formwork and steel fixingFactoryYour site
Pouring concreteFactoryYour site, in stages
CuringFactoryYour site, in whatever weather arrives
Inner and outer waterproofingPart of making the tankA contractor on your site
PlacementTruck and crane, usually one dayNone, the tank is built where it stands
Backfill and connectionsYour siteYour site

Both routes share the first and last rows. With precast, everything between them moves off your plot. Our article on preparing the site for a tank shows exactly what stays on your side.

Time, and an open pit on your plot

Precast removes the longest part of the job. When the spot is ready, the tank arrives and installation usually takes one day. After that, only connections and backfill remain.

Casting on site cannot be hurried very much. Concrete needs time to cure before the formwork comes off and the next stage starts, and between stages you may wait for a crew or a delivery. Throughout that period you have an open pit, timber, steel and workers on your land. If you are living in the house, have children around, or share the entrance with the cars, you will feel that. Close neighbours will notice the longer spell of dust and noise too.

Timing matters more still in an occupied building with a failing old tank, since every day without a tank means residents without water. If you are in that situation, see the signs a tank needs replacing and plan the swap before you are forced into it.

Why weather matters to a site-cast tank

Concrete does not simply dry. It reacts with water and needs suitable moisture and temperature to gain strength, a stage called curing. In a Saudi summer, heat and dry air pull water from the surface fast. The sun is fierce in Riyadh and Najran, while on the coast in Jeddah and Jubail humidity and salt join in. If curing is neglected, surface cracking can follow, and that puts strain on the waterproofing later.

A good contractor can handle all of this by pouring at a sensible hour, covering the work, keeping it wet and checking on it. But the result rests on that crew's attention, day after day. In a factory, the same steps repeat in the same order under engineering supervision. That is the honest difference. One method relies on a set routine, and the other relies on how things go that week.

Construction joints, where leaks like to start

A site-cast tank is not normally poured in one go. The floor comes first, then the walls, then the roof, and wherever one pour stops, new concrete meets old. Those joints are among the classic places for a tank to leak. They need the right detailing, such as a waterstop in the joint and a properly prepared surface before the next pour, and most of that work is soon buried from view.

General reassurance is not much use here. If you go with casting on site, ask the contractor precisely how the joint between floor and wall will be handled. If you do not get a clear answer, that tells you something too. Should you ever suspect a problem in an existing tank, how to detect a tank leak goes through the signs.

Waterproofing, and who owns it

Any concrete tank needs proper waterproofing. On a buried tank the outer layer protects against moisture from the soil, and the inner layer gives a surface suited to stored water. With site casting, a waterproofing contractor often follows the structural one. If trouble appears later, the conversation can turn into each blaming the other the concrete cracked, or the waterproofing was poorly applied.

On our precast tanks, both layers are part of the product, as explained in our waterproofing and bitumen article. The 10-year warranty covers manufacturing and installation, including cracks and leaks, so you have one party to call.

Get responsibility in writing

Whichever route you choose, ask for these in writing before signing. You may never need them, but a verbal promise is of little use on the day something goes wrong.

  1. What does the warranty cover cracks, leaks, waterproofing?
  2. Who fixes a defect that shows up after handover?
  3. Are excavation and backfill included or priced separately?
  4. When is the tank filled and tested, and who attends?
  5. What will the invoice and VAT look like?

Our quote is free and in writing, with VAT shown separately and an official tax invoice. The tank buying checklist works with any other offer you are holding as well.

Site access and fitting the space

Casting on site earns a clear point on access. It needs no crane route or large truck, only a way in for concrete and workers. If a crane truly cannot reach your site, that can settle the matter.

Because formwork is cut to suit, a site-cast tank can also take any shape an engineer draws, fitting between columns or into an awkward corner. A precast tank comes in seven fixed sizes. That sounds limiting, yet those sizes suit more spaces than people expect.

  • A long, narrow strip by the boundary wall? The 29 m³ long tank is only 2.50 m wide and 5.00 m long.
  • A square corner of the yard? The 22 m³ square tank measures 3.30 × 3.30 m and stands 3.00 m tall.
  • Tight space and a small family? The 14 m³ tank has our smallest footprint at 3.55 × 2.30 m.
  • More water without a bigger footprint? The 29 m³ wide tank has the same 4.40 × 2.90 m base as the 24 m³ tank, just taller.

Before you rule out a crane, send us photos of the route. A site that looks impossible sometimes needs only a simple arrangement. Crane and truck access explains what we look at.

When you need more capacity

Run the numbers first. A building with 4 flats and 5 people in each has 20 residents, who use about 5,000 litres a day at 250 litres per person. A 29 m³ tank covers them for almost 6 days. For about 12 days, install two and you have 58 m³. We connect them and prepare a special quote for several tanks. Try your numbers in the tank calculator and read the building water storage guide.

If a project needs hundreds of cubic metres in one place, though, casting on site is often the more realistic engineering answer, and we would rather tell you that up front.

Side by side

PointPrecastCast-in-place
Where it is madeFactory under engineering supervisionYour plot, in the current weather
Work on your plotShort, usually one day to installLong, in stages
Construction jointsDealt with in the factoryOn site, need careful detailing
SizesSeven set sizes, 14 to 29 m³Any size or shape
AccessNeeds truck and craneRoute for concrete and workers
Responsible partiesOneOften structure and waterproofing separately
Knowing what you getA defined product and dimensionsDepends on the contractor's execution
Tie-in with the structureIndependent of itCan be part of it

When casting on site is the right answer

  • The tank is designed into the basement or foundations and your engineer has tied it to the structure.
  • The capacity is very large and connecting tanks is not practical.
  • The space is irregular and no set size fits.
  • Truck or crane access is impossible even after looking for solutions.
  • You already have a structural contractor on site whose detailing and supervision you trust.

When precast is the right answer

  • The tank stands alone outside the building.
  • You live in the villa and do not want a building site in the yard.
  • You have a remote farm where daily contractor supervision is hard.
  • You want an underground tank and want the pit closed quickly.
  • You want one party to answer for manufacture, installation, waterproofing and warranty.

If you do cast on site, ask these

This article should be useful even if you do not choose us. Before work begins, make sure you have answers to these.

  • Which engineer designed the tank and its reinforcement?
  • How will the joints between floor, walls and roof be detailed?
  • How will the concrete be cured in hot weather, and when will the formwork come off?
  • What is the inner lining, and is it suitable for stored water?
  • Will the tank be filled and tested before backfilling?
  • What does the warranty cover, and who signs it?

For a broader picture, go back to the concrete water tank guide. If you are still deciding on the material, compare concrete and fibreglass or concrete and plastic.

Getting started with a precast tank

  1. Work out the capacity and decide whether the tank goes underground or above ground.
  2. Photograph the spot and the route to it, then send them with your location on WhatsApp.
  3. We reply with a written quote and an installation date.
  4. You prepare the site as agreed.
  5. The truck delivers, the crane places the tank, and installation is usually finished in a day.

We serve all of Saudi Arabia. Delivery and installation are free inside Riyadh, and other cities have a fee based on size and distance. Browse our tank sizes and service areas, or contact us today.

FAQ

Is a precast tank stronger than a tank cast on site?
Both are reinforced concrete and both can be strong if built correctly. The difference is control. Precast casting and curing happen in a factory under engineering supervision, whereas a site-cast result depends heavily on the contractor and the conditions at the time.
How long does a precast tank take to install?
Usually one day once the site is ready, meaning the pit or base is prepared and the truck and crane can get in. We agree the date with you when we quote.
Can I install a precast tank while my house is under construction?
Yes, and it is often easier then, before the boundary wall and yard are finished. Just make sure the position is fixed on the plans and the crane's route stays open.
Should the tank be built with the house foundations?
If the design integrates the tank with the basement or foundations, casting it on site makes it part of the structure, and that is your engineer's decision. If the tank stands alone outside the building, precast usually saves a great deal of work.
What if my project needs more than 29 m³?
We can install several precast tanks and connect them, with a special quote for projects. If the capacity is very large or the position is fixed within the structure, casting on site may be the better route.
Do you make custom sizes?
We offer seven set sizes from 14 to 29 m³. Send us the dimensions of your space and the number of people, and we will tell you which size fits and what arrangement works.

Ready to order your tank?

Message us on WhatsApp for a final delivered price to your city and an installation date.